Product/Service

Power Line Protection - DIN Rail mounted

Source: DEHN Inc.

Power Line Protection - DIN Rail mounted<P>
The DEHNguard® series consists of the basic DEHNguard® model, a single pole SPD (TVSS), single MOV modular device, with a thermal disconnect, in a sealed thermoplastic enclosure for DIN-3 rail mounting

Application of the DEHNguard® Series

The DEHNguard® series consists of the basic DEHNguard® model, a single pole SPD (TVSS), single MOV modular device, with a thermal disconnect, in a sealed thermoplastic enclosure for DIN-3 rail mounting, with a set of multifunctional terminals for wire or bus bar connection, and a red fault indicating flag window. Variations of the basic DEHNguard® are the P series with a replaceable plug-in MOV module, and the R model with contacts for remote monitoring or supervision. Four possible combinations are available. Note that the replaceable P series module can be inserted only into the base for which it was rated; it cannot be improperly fitted into another base.

The DEHNguard® series is intended for 600 V class applications to protect against overvoltage surges generated by lightning strikes or localized switching surges. Typical installations would be near main service entry distribution boards or sub-distribution boards or panels or directly associated with specific electrical equipment such as PLC, drives, or other sensitive equipment used in the industrial, commercial and telecommunications industry.

Click here to download the DEHNguard® Datasheet in pdf format.