These enclosures are designed to provide protection against dust, dirt, oil and water. They are for use in petrochemical plants, dairies, breweries, food processing areas and similar environments where they are subject to frequent high pressure hosing and generally wet conditions. They are also designed for use in areas where severe corrosion problems exist.
Adalet's NEMA 4X-SS enclosures are available in either 14 ga. Type 304 or Type 316 stainless steel with a #4 brush finish. (Replace -SS with -SS6 in catalog number when ordering Type 316 stainless steel.) The NEMA 4X-SS has continuously welded seams ground to a smooth finish. The NEMA 4X-SS enclosure has a folded lip around the door opening to provide complete and maximum gasket contact, and to prevent liquids from dripping into the enclosure when the door is open. Each enclosure comes complete with 3/8 collar studs (for mounting optional panels), 1/4-20 grounding studs, and four wall mounting back brackets. Type 316 enclosures are also suitable for use in offshore applications. (Not submersible.)
Each enclosure door is equipped with neoprene gasket, a removable print pocket, padlocking hasp, 1/4-20 grounding studs, and slotted quarter-turn latches. The door is easily removed by pulling the pin on the continuous stainless steel piano hinge.
Large NEMA 4X-SS enclosures come complete with additional panel mounting studs and maintain a rigid construction through the use of door and body stiffeners. There are no knockouts or holes in the door or body.
Adalet, Inc., 4801 West 150th Street, Cleveland, OH 44135-3397. Tel: 216-267-9000; Fax: 216-267-1681.