ELITEpro Portable polyphase power meter

Source: Optimum Energy Products Ltd.
The ELITEpro is a portable power meter used in a number of metering applications
The ELITEpro is a portable power meter used in a number of metering applications. It includes 4 channels of current (0-6000A), and 3 channels of voltage (0-600V AC or DC). It measures Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAr), Power Factor, and Harmonics (1st - 63rd).

ELITEpro features include:

  • KW, kWh, Volts, Amps, kVA, kVAr, and power factor recording for single-phase and three-phase loads
  • 128K of memory (~25,000 records) or 512K (~100,000 records)
  • Battery powered, no cords to plug-in
  • Remote downloading using an internal modem (optional)

    New expanded features include:

  • Power Quality: harmonics & waveform capture
  • Automatic data collection using dial-in or dial-out
  • Internal modem capability
  • Alarm capability (Hi and Low threshold for all measurements)
  • Also see our other Accessory Options for the ELITEpro


    The ELITEpro can monitor up to: four single-phase, 2 wire loads or two three-phase, 3 wire loads, or one three phase, 4 wire load. A variety of voltage taps and current transformers are available.


  • 4 channels of current, 0-6000A
  • 3 channels of voltage, 0-600 V AC or DC Power
  • Volts, Amps, Watts, Volt-Amps,
  • Volt-Amps-Reactive, Power Factor

    Measurements: True RMS
    Frequency: 50 or 60 Hz
    Accuracy: <1% of reading exclusive of sensor accuracy
    Baud Rate: 1200 - 57,600
    Resolution: 12 bit (1 part in 4,096); 0.1 Volt, 0.01 Amp, 1 Watt, 1 VAR, 1 VA, 0.01 PF
    Memory: 128k (25,000 readings) or 512k (100,000 readings)
    Sampling Frequency: 7.68 kHz (128 points per waveform)
    Recording Intervals: 3, 15, 30 seconds; 1, 5, 15, 30, 60 minutes; and 12, 24 hours
    Recording Events: Average, minimum and maximum
    Real Time Clock: 20 ppm accuracy (<1min/month)
    Operating Temperature: -7 to 60C (20 to 140F)
    Battery Life: 3-10 years @ 1 min. sampling, with LED indicator of low battery charge
    Harmonic Analysis: to the 63rd Harmonic
    Uses and Applications

  • Load Profile creation
  • Load Research
  • Equipment Monitoring
  • Building Monitoring
  • Energy Management analysis (pre and post retrofit)
  • Power Quality studies
  • Utility disturbance monitoring
  • Many, many more uses. Contact Us if you have questions.

    Optimum Energy Products Ltd., #236, 16 Midlake Blvd SE, Calgary, AB T2X 2X7. Tel: 403-6307181; Fax: 403-256-3431.