The BlueBird-AMPS (Analog) modem connects to a Motorola 3-watt transceiver to provide maximum wireless coverage where 800Mhz cellular analog networks operate...
- 3-watt AMPS/analog cellular modem
- Available in circuit-board format for integration into OEM products
- Greatest geographic cellular coverage in North America
Click here to download the BlueBird AMPS datasheet in pdf format.
Features and Benefits
Features |
Benefits |
Remote Hard
Reset |
In the event
that a 'hard power-on' is required, the BlueBird allows the
operator to remotely re-boot the field-installed equipment. |
Shut Off
Protection |
The BlueBird
automatically restarts the field-installed equipment after a
power loss, minimizing downtime. |
Remote
Diagnostics |
Operators
can remotely check the status of the wireless network and
cellular phone for signal strength and conditions such as 'Fast
Busy', 'No Service' and 'Locked' reducing the need for on-site
intervention. |
Auto Re-try
on 'Fast Busy' and 'No Service' |
The BlueBird
recognizes 'Fast Busy' and 'No Service', conditions unique to
wireless communications. It will automatically initiate an auto
re-dial process guaranteeing the call is completed regardless of
network status. |
MNP10TM
Error Correction |
The BlueBird
supports the industry standard MNP10TM, ensuring the
integrity of data over a variable signal and enhancing wireless
communication performance. |
Single Power
Source |
Only one
power source is required for both the BlueBird and cellular
phone, increasing portability and simplifying installation. |
Technical Specifications
Dimensions(L
x W x H)
- BlueBird .6 Watt Version
- BlueBird 3 Watt Version |
134mm x 130mm x 38mm (5.25" x 5.10" x 1.50")
114mm x 83mm x 32mm (3.25" x 4.50" x 1.25") |
Environmental |
Operating
Temperature: -25°C to +60°C / -13°F to +140°F
Relative Humidity: 0 to 95% non condensing |
Connectors
- BlueBird .6 Watt Version
- BlueBird 3 Watt Version |
1 Standard RS-232, 25-pin serial connector
1 RJ-45 connector for Motorola DPC Transceiver
1 MTA 100 type, 4-pin connector for 2 opto-isolated external
resets
1 Standard RS-232, 9-pin serial connector
2 RJ-45 connectors for Motorola 3 Watt Transceiver and Handset
1 MTA 100 type, 4-pin connector for 2 opto-isolated external
resets |
Regulatory
compliance |
FCC part 15,
class B |
LED
indicators |
Transmit
data: TX
Receive data: RX
Data terminal ready: TR
Carrier detect: CD
Power and phone status: PWR/STATUS |
Modem |
MNP10TM
for enhanced performance
14.4 Kbps modem
Shut off protection
Hard reset by user from remote site
Modem reset and two external resets for peripherals |
Applications
- EMS, Fire and other Emergency Services
- Public Transit & Transportation
- Vehicle Tracking - AVL
- Field Service & Mobile Dispatch
- Utility Automatic Meter Reading (AMR)
- Automated machine-to-machine (M2M)
- Telemetry and SCADA
| |