Pathfinder Cable and Pipe Locators
Source: Rycom Instruments, Inc.
The 8840 Path Finder and the 8850 Pathfinder II cable and pipe locators rival any path locators at any price
The 8840 Path Finder and the 8850 Pathfinder II cable and pipe locators rival any path locators at any price. The innovative design allows the user to easily pick up the signal with the lightweight, handheld receiver at waist level. The superior technology and filtering developed within the Path Finder locators, make it possible to locate in and around power lines without any interference.
The 8840 Path Finder and the 8850 Path Finder II are available in peak or null versions. Both models feature a variable pitch audio tone. This gives the user a better indication of the meter setting and location of the cable or pipes path. The unique design of the Path Finder units permits the receiver and transmitter to be housed within a single, high-impact, bright yellow carrying case.
The 8840 Path Finder is equipped with a single frequency of 815Hz. This low frequency is used for optimum path locating while using the direct connections.
The 8850 Path Finder II has dual frequencies; the low frequency 815Hz and the high frequency 82kHz. By choosing the 82kHz, the user has the ability to choose between the direct connection, transmitter induction, or Flexicoupler induction when purchasing the optional Flexicoupler. Depth measurements can be accomplished by the 45 degree triangulation or the straight-lift method up to 15 feet.
The 8840 Path Finder and the 8850 Path Finder II are available in peak or null versions. Both models feature a variable pitch audio tone. This gives the user a better indication of the meter setting and location of the cable or pipes path. The unique design of the Path Finder units permits the receiver and transmitter to be housed within a single, high-impact, bright yellow carrying case.
The 8840 Path Finder is equipped with a single frequency of 815Hz. This low frequency is used for optimum path locating while using the direct connections.
The 8850 Path Finder II has dual frequencies; the low frequency 815Hz and the high frequency 82kHz. By choosing the 82kHz, the user has the ability to choose between the direct connection, transmitter induction, or Flexicoupler induction when purchasing the optional Flexicoupler. Depth measurements can be accomplished by the 45 degree triangulation or the straight-lift method up to 15 feet.
Rycom Instruments, Inc., 9351 E 59th Street, Raytown, MO 64133-3895. Tel: 816-353-2100; Fax: 816-353-5050.
This website uses cookies to ensure you get the best experience on our website. Learn more