Products and Services
RSS
Electrical Safety Compliance Assessment
AVO Training Institute, Inc.
Not sure what you need to do to be in compliance with applicable OSHA, NFPA 70E, NEC®, IEEE and NESC electrical safety regulations and standards? An on-site electrical Safety Needs Assessment performed by our electrical safety specialists will provide you with a comprehensive written report of your compliance status and recommendations for corrective action.
The duration of the assessment depends on your organizations power system size but generally two days onsite is standard. The assessment includes:
Facility Inspection - Compliance inspection of your electrical facilities and installations. You will receive pictures, descriptions and recommendations for each discrepancy type
PPE Inspection - Examination of the storage, maintenance, testing and documentation procedures for your PPE program
Job, Task and Hazard Analysis - Evaluate clients existing hazard analysis and make recommendations where necessary to meet the performance requirements of current OSHA Regulations and Industry Consensus Standards such as NFPA 70E and IEEE 902
Electrical Safe Work Program/Safety Procedures Evaluation - Evaluation of all components of your electrical safe work program and safety procedures for standards compliance
Our electrical safety experts will provide you with a comprehensive assessment that will reference the following:
29 CFR 1910.331–.335, "Electrical Safety-Related Work Practices" or State Plan equivalent regulations.
29 CFR 1910.269, "Power Generation, Transmission and Distribution" or State Plan equivalent regulations.
Federal and State OSHA
National Electrical Code® - NEC
NFPA 70E "Standard for Electrical Safety in the Workplace"
National Electrical Safety Code - NESC
29 CFR 1910 Subpart I "Personal Protective Equipment" or equivalent State Plan regulations.
ASTM 10.03 Electrical Insulation and Electronics requirements associated with PPE.
29 CFR 1910.147 "Control of Hazardous Energy Source (Lockout/Tagout)" or equivalent State Plan regulations.
29 CFR 1910.333(b) "Working On or Near Exposed De-Energized Parts" or equivalent State Plan regulations.
29 CFR 1910.269(d) "Hazardous Energy Control (Lockout/Tagout) Procedures" or equivalent State Plan regulations.
29 CFR 1910.369(m) "De-Energizing Lines and Equipment for Employee Protection" or equivalent State Plan regulations.
29 CFR 1910.132 "Personal Protective Equipment" or equivalent State Plan regulations.
IEEE Standard 1584 "Guide for Performing Arc-Flash Hazard Calculations" or equivalent State Plan regulations.
Upon completion, a comprehensive report is prepared to identify areas needing attention to ensure compliance with applicable regulations and standards. These areas are analyzed and recommendations are made to provide a safe, cost-conscious, doable solution.
Let us work with you to ensure that your facility protects your employees and complies with applicable regulations, codes and standards.
Our electrical safety experts will provide you with a comprehensive assessment that will reference the following:
Upon completion, a comprehensive report is prepared to identify areas needing attention to ensure compliance with applicable regulations and standards. These areas are analyzed and recommendations are made to provide a safe, cost-conscious, doable solution.
Let us work with you to ensure that your facility protects your employees and complies with applicable regulations, codes and standards.
