RCS PlusSeries Thyri-Power - Battery Charger System
Source: AMETEK Solidstate Controls
The
RCS Series Battery Chargers are thyristor-based systems designed for
high-efficiency conversion of incoming commercial AC to DC power for
charging large banks
The
RCS Series Battery Chargers are thyristor-based systems designed for
high-efficiency conversion of incoming commercial AC to DC power for
charging large banks of station batteries, while supplying power to
continuous DC loads, such as inverters.
The battery charger is intended for use in UPS systems, as well as a stand-alone device for battery charging only applications.
The battery charger is intended for use in UPS systems, as well as a stand-alone device for battery charging only applications.
- High reliability - exceeds 140,000 hours (16 years) MTBF
- Phase-controlled six SCR topology
- Low audible noise
- Maintains DC voltage regulation at +0.5% on float
- Output is
maintained even with the loss of one phase input-insensitive to
phase rotation
- Industrial grade - built to operate in extreme environments
- Vacuum impregnated
magnetics with 200ºC epoxy insulation
- All components are front accessible- no side or back clearance required
- Lighted mimic panel display
- High efficiency
- greater than 90% for 50 Amp size
AMETEK Solidstate Controls, 875 Dearborn Dr, Po Box 1249, Columbus, OH 43085. Tel: 614-8467500; Fax: 614-885-3990.
This website uses cookies to ensure you get the best experience on our website. Learn more