Product/Service

Pike Poles

Source: Oshkosh Tool Co., Inc.
Pike Poles were designed to aid the practical person in the field using pole line tools
Pike Poles were designed to aid the practical person in the field using pole line tools. Pike Poles are used to pike or support a pole when setting in the field. The pike is made of special steel made of one piece with upset face which will take the force of the end thrust and distribute it over the entire end of the handle. The ferrule is made of malleable iron. A rivet runs completely through the ferrule, handle and pike to further secure them.

Pikes Poles can be furnished with a Point Guard. The guard works easily and fastens securely in either the guarded or open position. When in the unguarded position the guard is completely out of the way, snugly fitted around the pole. When the guard is in position, it automatically locks in place and provides protection from the pike point. The Guard will fit either the 2" or 2-1/2" pike poles.

The Twisted Pike will screw itself into a hard pole. It takes considerable effort to pull it straight out, but by turning the pole the same as one would turn out a screw it comes out easily.

Oshkosh Tool Co., Inc., 1402 Mt. Vernon St. - P.O. Box 406, Oshkosh, WI 54903. Tel: 920-231-8665; Fax: 920-232-3532.