Source: Sunbelt Transformer, Inc.
Features of the Padmount Transformers are:
Standard
Features
- No-Load Tapchanger when
required
- Secondary Spade
Connectors
- Drain Valve or
Combination Drain and Sampler Valve
- Pressure Relief
Valve
- Upper Filter Press
Connection
- NEMA Two-Hole Ground
Pad
- Stainless Steel
Nameplate
- Provision for Jacking
and Lifting
- Base Suitable for
Rolling or Skidding
- Reinforced Steel Plate
Tank
- Externally Clamped High
and Low Voltage Bushings
- Welded Cover with
Handhole
- Enamel Finish to 4 mil
thick (Your choice of color)
|
Optional
Features
- High Fire Point
Fluid
- 50 HZ Frequency
- 55/65 Degree C
Temperature Rise
- Loop Feed
- Dead Front (All
Connection Parts Available)
- Dial-Type
Thermometer
- Pressure Vacuum Gauge
(also with Bleeder)
- Pressure Relief
Device
- Bayonet Fuses
- Current Limiting
Fuses
- Loadbreak Oil
Sectionalizing Switches
- Secondary Molded-Case
Breaker
- Lightning
Arresters
- Metering Package
- CT's and PT's
- Gauges and Contacts
|
Construction
- Radial or Loop
Feed
- Live Front - Dead
Front
- Tamper Proof
Enclosure
- Rectangular Coil
Design
- Distributive Gap
Silicone-Steel Core
Ratings
- 75 KVA through 7500
KVA
- Primary Voltages through
46 KV - 250 KV BIL
- Secondary Voltages
through 15 KV - 110 KV BIL
|
Sunbelt Transformer, Inc., 1922 South MLK Jr Dr, Temple, TX 76504. Tel: 254-771-3777; Fax: 254-771-5719.