Nema Type 4 X - Aluminum

Adalet's NEMA 4X aluminum enclosures are used indoors and outdoors to house such items as pilot devices, electronic/electrical controls, instrumentation systems, and pneumatic, hydraulic and machine tool controls. These lightweight enclosures are designed to provide protection against dust, dirt, oil and water. They are for use in petrochemical plants, sewage plants, marine uses, areas containing solvents and similar environments where they are subject to frequent high pressure hosing and generally wet conditions. They are not designed for use in areas where severe corrosion problems exist.(Not submersible.)

Construction
Adalet's NEMA 4X aluminum enclosures are available in .080" Type 5052-H32 aluminum with a smooth brushed finish. The NEMA 4X aluminum has continuously welded seams ground to a smooth finish. The NEMA 4X single door enclosure has a folded lip around the door opening to provide complete and maximum gasket contact and to prevent liquids from dripping into the enclosure when the door is open. Each enclosure comes complete with 3/8 collar studs (for mounting optional panels), ¼-20 grounding stud on inside of box and four wall mounting back brackets. Each enclosure door is equipped with a neoprene gasket, optional print pocket, padlocking hasp and stainless steel door clamping hardware. The door is easily removed by pulling the pin on the continuous aluminum piano hinge. Both the mounting brackets and piano hinge are secured to the box by mechanical clinching. Large NEMA 4X aluminum enclosures come complete with additional panel mounting studs and maintain a rigid construction through the use of door and body stiffeners. There are no knockouts or holes in the door or body.

Styles

• JIC Enclosures
  
• Wall-Mounted Single Door Enclosure

Sizes

• Adalet NEMA 4X aluminum enclosures range in size from: 6" X 6" X 4" to 48" X 36" X 8"

Adalet, Inc., 4801 West 150th Street, Cleveland, OH 44135-3397. Tel: 216-267-9000; Fax: 216-267-1681.